2 - Power fault

2 - Power fault

Power supplied outside of range.

This error may be caused by the internal power supply, the power cable, or power source. If you cannot confirm that the power cable you are using is the one that was shipped with your MagStor, make sure the cable is a 10A 125V power cable or try a different similarly rated cable. Using a different outlet may also solve the problem.

If the error persists, contact MagStor support team.

    • Related Articles

    • 1 - Temperature fault

      This fault occurs when the drives sensor detects temperatures outside of operational range. Check that the fan on your MagStor is operational. If the fan has ceased functioning, this may cause the issue. The temperature of the environment may also ...

    • 6/7 - Drive or Media fault

      Note from Support - Confirm that the tapes you are using originate from a trusted seller. We have had reports of some tapes obtained through marketplace vendors (ex: Amazon, Ebay, NewEgg) being damaged, used or non functional. We love the convenience ...

    • LTOx SAS Desktop

      Download the latest SAS-HLX manual below:

    • LTOx Thunderbolt 3 Desktop

      TRB3-HLx Manual

    • Can I plug my Thunderbolt 3 cable into any USB-C port?

      While Thunderbolt 3 shares the same connection type as USB-C, not all USB-C ports are Thunderbolt 3 enabled. Look for the Thunderbolt insignia next to the port if you aren't sure. Note that some MACs do not have the insignia printed on them, and the ...