Thunderbolt-3 LRU LTOx Raid
RAID/Pass-Through Configuration
ArcSAP is the software to configure RAID and Pass-Through devices from the MagStor LRU to your host operating system. Once connected you will be able to configure RAID and LTO tape drive visibility to your operating system. The ArcSAP default ...
ArcSAP Default Password
The ArcSAP default password is 0000 . You will need this password in order to create/delete RaidSets and Volumes. When using advanced features through the web browser you will be asked a user name. The default username is "admin" and the password is ...
LTO Drive Pass-Through Configuration
If you need to configure a tape drive or a single SSD for operating system access it will need to be configured as a "Pass-through disk". Open the Arcsap utility and select the "ARC-1886-8I" Device under "LocalHost". Right click and select "New ...
Creating a RAID set and RAID volume
The disks will be inaccessible to the host operating system until a RAID or pass through device is configured. Download and install ARCSAP controller software. ArcSAP RAID Configuration Software : Technical Support Portal (freshdesk.com) Once ...
HDD not seen in TRB3 Removable Hard Drive Bay
HDD not seen in TRB3 removable drive bay The underlying HBA within our TRB3 had RAID abilities by default. If needed, you must clear the existing configuration and reset the HBA to a JBOD configuration to see the hard disks used in the removable, ...
ArcSAP RAID Configuration Software
The ArcsSAP software will be needed when configuring RAID. ArcSAP macOS Installer ArcSAP Windows Installer ArcSAP Manual